Uredite DOC v C++ z REST API

Naša knjižnica C++ omogoča razvijalcem možnost, da neposredno spremenijo DOC dokument z urejanjem njegovega objektnega modela dokumenta (DOM), kar pomeni, da ni treba namestiti dodatne programske opreme.

Uredite besedilo v DOC datoteki s pomočjo C++

Najbolj priljubljen primer za urejanje DOC datoteke je urejanje besedila. Z dano programsko rešitvijo lahko besedilo dodajate, spreminjate ali brišete s pomočjo C++ znotraj dokumenta.

Uredite tabelo v DOC datoteki s pomočjo C++

Druga priljubljena možnost urejanja DOC je urejanje tabele. Naš C++ SDK vam omogoča delo s tabelami in besedilom v celicah tabele.

Razvijalci C++ lahko dodajajo ali odstranijo celice tabele in tabele ter dodajajo, urejajo in odstranijo besedilo v njih.

Dodajte sliko v DOC datoteko s pomočjo C++

Poleg urejanja besedila in tabel v DOC obstaja še ena pogosta možnost: dodajanje slik dokumentu v C++. Razvijalci C++ lahko z DOM om dodajo tudi sliko v DOC datoteko.

Programsko uredite DOC

Preizkusite ta zmogljiv C++ SDK in ocenite nekatere možnosti pri urejanju DOC dokumentov. Z naslednjim primerom naložite svoj DOC dokument in naredite nekaj sprememb: dodajte besedilo, dodajte tabelo in celico tabele z besedilom ali vstavite sliko v DOC dokument:

Uredite besedilo, tabele ali slike v DOC z uporabo C++

Vhodne datoteke

Naložite dokument, ki ga želite spremeniti

Zaženi kodo

Naložite sliko, ki jo želite vstaviti

Izhodni format

S seznama izberite ciljno obliko

				
				
				
		

					using namespace aspose::words::cloud;

auto config = std::make_shared<ApiConfiguration>(L"####-####-####-####-####", 
   L"##################");
auto wordsApi = std::make_shared<WordsApi>(config);

auto requestDocument = std::shared_ptr<std::istream>(new std::ifstream(
   std::filesystem::path(L"Input.doc"), std::istream::binary));
auto requestParagraph = std::make_shared<aspose::words::cloud::models::ParagraphInsert>();
requestParagraph->setText(std::make_shared<std::wstring>(L"Morbi enim nunc faucibus a."));

std::shared_ptr<requests::InsertParagraphOnlineRequest> insertParagraphRequest(
    new requests::InsertParagraphOnlineRequest(
        requestDocument, requestParagraph
    )
);
auto insertParagraph = wordsApi->insertParagraphOnline(insertParagraphRequest);

std::shared_ptr<requests::ConvertDocumentRequest> convertRequest(
    new requests::ConvertDocumentRequest(
        insertParagraph->document->values.begin,
          std::make_shared<std::wstring>(L"doc")
    )
);
auto convert = wordsApi->convertDocument(convertRequest);
				

					using namespace aspose::words::cloud;

auto config = std::make_shared<ApiConfiguration>(L"####-####-####-####-####", 
   L"##################");
auto wordsApi = std::make_shared<WordsApi>(config);

auto requestDocument = std::shared_ptr<std::istream>(new std::ifstream(
   std::filesystem::path(L"Input.doc"), std::istream::binary));
auto requestTable = std::make_shared<aspose::words::cloud::models::TableInsert>();
requestTable->setColumnsCount(std::make_shared<int32_t>(1));
requestTable->setRowsCount(std::make_shared<int32_t>(2));

std::shared_ptr<requests::InsertTableOnlineRequest> insertTableRequest(
    new requests::InsertTableOnlineRequest(
        requestDocument, requestTable, std::make_shared<std::wstring>(L"")
    )
);
auto insertTable = wordsApi->insertTableOnline(insertTableRequest);

std::shared_ptr<requests::ConvertDocumentRequest> convertRequest(
    new requests::ConvertDocumentRequest(
        insertTable->document->values.begin,
          std::make_shared<std::wstring>(L"doc")
    )
);
auto convert = wordsApi->convertDocument(convertRequest);
				

					using namespace aspose::words::cloud;

auto config = std::make_shared<ApiConfiguration>(L"####-####-####-####-####", 
   L"##################");
auto wordsApi = std::make_shared<WordsApi>(config);

auto requestDocument = std::shared_ptr<std::istream>(new std::ifstream(
   std::filesystem::path(L"Input1.doc"), std::istream::binary));

auto requestDrawingObject = 
   std::make_shared<aspose::words::cloud::models::DrawingObjectInsert>();
requestDrawingObject->setHeight(std::make_shared<double>(0));
requestDrawingObject->setLeft(std::make_shared<double>(0));
requestDrawingObject->setTop(std::make_shared<double>(0));
requestDrawingObject->setWidth(std::make_shared<double>(0));
requestDrawingObject->setRelativeHorizontalPosition(
   std::make_shared<aspose::words::cloud::models::DrawingObjectInsert::RelativeHorizontalPosition>(
      aspose::words::cloud::models::DrawingObjectInsert::RelativeHorizontalPosition::MARGIN));
requestDrawingObject->setRelativeVerticalPosition(
   std::make_shared<aspose::words::cloud::models::DrawingObjectInsert::RelativeVerticalPosition>(
      aspose::words::cloud::models::DrawingObjectInsert::RelativeVerticalPosition::MARGIN));
requestDrawingObject->setWrapType(
   std::make_shared<aspose::words::cloud::models::DrawingObjectInsert::WrapType>(
      aspose::words::cloud::models::DrawingObjectInsert::WrapType::INLINE));

auto requestImageFile = std::shared_ptr<std::istream>(new std::ifstream(
   std::filesystem::path(L"Input2.doc"), std::istream::binary));
std::shared_ptr<requests::InsertDrawingObjectOnlineRequest> insertDrawingObjectRequest(
    new requests::InsertDrawingObjectOnlineRequest(
        requestDocument, requestDrawingObject, requestImageFile, 
		   std::make_shared<std::wstring>(L"sections/0")
    )
);
auto insertDrawingObject = wordsApi->insertDrawingObjectOnline(insertDrawingObjectRequest);

std::shared_ptr<requests::ConvertDocumentRequest> convertRequest(
    new requests::ConvertDocumentRequest(
        insertDrawingObject->document->values.begin,
          std::make_shared<std::wstring>(L"doc")
    )
);
auto convert = wordsApi->convertDocument(convertRequest);
				

				Zaženi kodo
			